Increase productivity and turnaround times

achieved by inline priming.

Cees Schouten, technical director at Geostick, with one of the three HP Indigo WS6600 Digital PressesGeostick B.V., of the Netherlands, has installed three HP Indigo WS6600 Digital Presses for the purpose of extending uptime and to increase productivity due to the current demands of the label market.

All of the new presses include the In-Line Priming (ILP) option, which uses a water-based primer to treat standard paper and also synthetic substrates. This feature was a particular selling point for Geostick commented HP, as it helps reduce turnaround times by eliminating the extra step of off-line substrate preparation.

“We had three HP Indigo WS6000 Digital Presses, which we were very pleased with, but we were ready to upgrade and the obvious choice was the HP Indigo WS6600,” said Cees Schouten, technical director, Geostick. “Previously, we were priming everything off-line, but knew that inline priming would be much more efficient and enable us to lower costs, so we chose to have this feature on the presses. We can do more in the same amount of time, which means we can offer our customers shorter turnaround times.”

HP added that Geostick was impressed with the short setup time of the HP Indigo WS6600, and also its ability to print on substrates from 12 - 450 microns including paper and plastic. Schouten described the press as a versatile, highly productive offset press, ideal for printing labels for its major customers in the chemical and food industries, and labels for logistics applications that may include barcodes and QR codes that are read electronically. Also according to Geostick, the automatic calibration on the HP Indigo WS6600 Digital Press has improved compared to earlier models, giving the press more stability on repeat lengths.

“One huge benefit of the HP Indigo WS6600 is that the cost of printing has been reduced, so we are spending less per square metre,” commented Schouten. “We can pass that price reduction on to our customers to maintain our competitive edge. The press requires little or no operator intervention, so money is also saved there.”

Geostick wants to retain flexibility for its customers, so the ability for it to deliver high-quality results, quickly, and in varying run-lengths, number of colours and range of substrates is very important. Recently, the company was able to take on a large project, 20,000 labels to be produced in 24 hours for a customer. With the new HP Indigo WS6600 Digital Press, it was able to take on the work and meet the challenge.

“More uptime on the printer means we can take on more work, but still offer quick turnaround times,” concluded Schouten. “We are expecting our sales to increase by more than 10 per cent following the installation of all three presses, and we are looking forward to welcoming new customers.”

Geostick has been an HP Indigo press user since 2005 when it purchased an HP Indigo press ws4050.

The HP Indigo WS6600 Digital Press has a printing speed of up to 30 metres per minute in full colour and also has the new Enhanced Productivity Mode, enabling Geostick to print up to 40m/min in colour.

More information is available at www.hp.com/go/gsb

http://www.geostick.nl/

Like us on Facebook www.facebook.com/dpnlive - click the ‘LIKED’ button/top of page as well